跳至主要内容

HDPE Geocell

HDPE Geocell

HPDE Geocell is a three-dimensional honeycomb closed product with the characteristics of low cost, easy deployment, high strength, and high permeability. BPM high-quality HDPE geocells are made of high-density polyethylene (HDPE) and are joint welded by ultrasonic technology to ensure consistency and resistance to erosion. BPM geocells are widely used in building erosion control, flat ground, coastline, steep slopes, multi-layer retaining walls, channel protection and structural reinforcement, and are used for heavy-duty support roads and soil conservation.

High-density polyethylene (HDPE) and manufacturing. HDPE has been used in the most demanding industrial products. The three-dimensional unit prevents the lateral movement of the filling material, increases the structural strength and locks the material to prevent erosion. The cell walls are perforated to allow water flow through the system, thereby creating a better root zone between cells for plant applications. On GeoCell filled with concrete, the HDPE matrix becomes the form of concrete. No wooden formwork or steel reinforcement is required. The panel is unfolded and the concrete is poured directly into the GeoCell.

More about Luyuan Geocell, please click our web

评论

发表评论

此博客中的热门博文

What Is a Dimpled Drainage Matting?

What Is a Dimpled Drainage Matting? Most  dimpled drainage matting  consist of a polypropylene or high-density polyethylene  sheet, molded into a series of raised knobs, or dimples. Polyethylene dimpled drainage mat helps water flow away from the foundation. Without it, water can stay trapped against the concrete or pool at the bottom. Drainage mats come with a dimpled design that lets water accumulate and flow away, creating an air gap. When a dimple mat is placed against a concrete wall, the dimples make the plastic stand out from the wall, leaving a free-draining air space between the plastic and the concrete. If any water reaches this air space, it easily flows to the bottom of the dimple mat. As water flows, it picks up small particles of silt and soil. When water stops moving—like when it reaches a concrete wall—silt and soil will accumulate, further increasing the pressure against the foundation. A drainage ma's membrane protects the mat from sediment clogging...
发表评论
阅读全文

What Methods should be Paid Attention to During the Construction of Geomembrane

  Construction method:   Do not drag or pull the geomembrane during transportation to avoid injury from sharp objects. 1. Extend from the bottom to the high position, don't pull it too tightly, and leave a margin of 1.50% to prepare for local sinking and stretching. Taking into account the actual situation of this project, the slope shall be laid from top to bottom; 2. The longitudinal joints of two adjacent panels should not be on the same horizontal line, and should be staggered by more than 1m; 3. Longitudinal joints should be more than 1.50m away from the dam foot and bend foot, and should be located on a plane; 4. Slope first and bottom of the field; 5. When laying on a slope, the film spreading direction should be basically parallel to the line of maximum slope. Layout: 1. Before laying the geomembrane, the corresponding qualified acceptance certificate of the civil engineering should be obtained. 2. Before cutting the geomembrane, the relevant dimensions should be accu...
发表评论
阅读全文

What are the Precautions For Geogrid Transportation And Storage?

As a   Geocell Supplier , share with you. Geogrid is a material often seen in various building constructions, and its demand is still very large. How to store and transport the purchased materials is also a problem that customers care about. Geocell for Load Support 1. Storage of geogrid. Geogrid is a geosynthetic material produced from unique construction materials such as polypropylene and polyethylene. It has the disadvantage of being easy to age when exposed to ultraviolet light. Therefore, steel-plastic geogrid reinforced grids should be stacked in a room with natural ventilation and light isolation; The total time for the accumulation of the reinforcement is not more than 3 months. If the accumulation time is too long, it needs to be inspected again; when paving, attention should be paid to reduce the time of direct exposure to natural light to avoid aging. 2. Engineering construction of reinforcement. In order to prevent Geshan from being damaged at the construction site, a ...
发表评论
阅读全文